AFM

  1. T.L. Pruyn and R.A. Gerhardt, “Percolation in Borosilicate glass matrix composites containing Antimony-doped Tin Oxide segregated networks. Part I: Fabrication of Segregated Networks,” J.Am.Ceram.Soc., accepted (2013).

(DOI: 10.1111/jace.12534)

 

  1. J. Waddell, R. Ou, C.J. Capozzi, S. Gupta, C.A. Parker, R.A. Gerhardt, K. Seal, S.V. Kalinin and A.P. Baddorf, “Detection of percolating paths in polyhedral segregated network composites using electrostatic force microscopy and conductive atomic force microscopy,” Appl.Phys.Lett. 95, 233122 (2009). Published online 11 Dec. 2009.

(DOI: 10.1063/1.3265742)

 

  1. Brian D. Bertram And Rosario A. Gerhardt, “Room Temperature Properties of Electrical Contacts to Alumina Composites Containing Silicon Carbide Whiskers,” J. Applied Phys. 105, 074902 (2009). Published online 3 April 2009.

(DOI: 10.1063/1.3086279)

 

  1. V.S.K.G. Kelekanjeri and R.A. Gerhardt, “Etch pit and γ′ precipitate evolution in controlled Waspaloy microstructures aged at 725, 800 and 875 °C ,”  Acta Materialia 57[2], 616 – 627(2009).  Published online 10 Nov. 2008.

(DOI: 10.1016/j.actamat.2008.10.010)

 

  1. Chunqing Peng, Yonathan S. Thio and Rosario A. Gerhardt, “Conductive paper fabricated layer-by-layer assembly of polyectrolytes and ITO nanoparticles,” Nanotechnology 19,  505603 (10pp) (2008).

(DOI: 10.1088/0957-4484/19/50/505603)

 

  1. V.S.K.G. Kelekanjeri and R.A. Gerhardt, “Computation of the Complex Impedance of a Cylindrical Conductor in an Ideal Two-probe Configuration,” Invited chapter for a book entitled Recent Advances in Modeling and Simulation,  In-Tech Publications, pp. 85-110(2008).

(DOI: 10.5772/5987)

 

  1. R. Ou, G. Cui, R.A. Gerhardt, and R.J. Samuels, “Effect of stretching on the structure and electrical conductivity of doped and undoped  poly(phenylene vinylene) thin films,” Electrochimica Acta 51[8-9], 1728-1735(2006). Published online 31 Aug. 2005.

(DOI: 10.1016/j.electacta.2005.02.140)

 

  1. G. Cui and R.A. Gerhardt, “Characterization of the electrical properties of Nickel-based CMSX-4 super-alloys using atomic force microscopy (AFM),” Microscopy & Microanalysis Conference 2004.

(DOI: 10.1017/S1431927604882291)

 

  1. K. Pinkos, C. Laboy and R.A. Gerhardt, “Effect of Grain Boundaries and Indentation Load on the Electrical Properties of Nickel Base Super-alloys,” Mat.Res.Symp.Proc. 699, 289-294(2002).

(DOI: 10.1557/PROC-699-R2.5)